ALTANA Color-View - Manual (Page 28)

Chapter 2 INSTALLATION
35
NOTE
The I/O Port of the color-view™ Spectrophotometer
is recessed into the back of the unit. This feature
allows maximum utilization of bench space by
requiring only 25 mm (1 inch) behind the sensor.
b. Depending on the computer system being used, a 25 pin
to 9 pin cable may be required.
c. Secure the connectors with screws at both ends.
4.
Power Up
a. Turn ON the Printer, Monitor and Computer CPU power
ON/OFF switches.
b.
Turn on the color-view™ Spectrophotometer with its
power switch.