ALTANA Color-View - Manual (Page 42)

color-view™ Spectrophotometer User’s Guide
50
3.3 OPERATIONAL REQUIREMENTS AND PROCEDURES
This section explains the operational requirements and procedures
for the
color-view™ Spectrophotometer.
WARNING
The following cautionary notes have been attached to the
instruments. Failure to observe these notes, to give appropriate care
and to use common sense in handling the instrument can invalidate
the instrument warranty (Conditions of Sale are binding if any
warranty question arises regarding the instrument).
The manufacturer is not responsible for any damage caused to the
instrument due to inattention to proper operating procedures, undue
force, and/or lack of taking commonly known precautions against
mechanical or electrical hazards.
3.3.1 Operating Constraints
Care must be taken to ensure that the reflectance samples are in
contact with the measurement port and motionless during the
measurement sequence.
3.3.2 Dust and Contaminants
Care should be taken to prevent dust and other contaminating
materials from collecting inside the Sample Port. When the system
is not in use the reflectance port should be covered.