AvMap GeoPilot II Plus - Manual (Page 22)

22
‘ENTER’
2.6 SYSTem SeTUP oPTIonS
You may select how the Geopilot II Plus displays primary information (such as how time is displayed)
from the System Setup Menu.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’
Refer to Chapter 14 for information about the System Setup Menu.
2.7 dATA enTrY
Information is keyed into the Geopilot II Plus when editing a Waypoint, entering a Flight Plan, using
the calculator and searching the Database. When the field is highlighted:
- Enter or edit data by pressing up/down cursor key to step through the available characters until
the desired character is displayed.
- Press right cursor key to move the cursor to the right.
- Use left cursor key to move the cursor to the left.
Some pilot-entered data requires either a +, - or a hemisphere identification:
- Move the cursor over the displayed symbol and press up/down cursor key until the desired
symbol appears.
- Press ‘ENT’ to continue to the next line or to return to the previous menu.