AvMap GeoPilot II Plus - Manual (Page 52)

52
Using CF memory cards with different versions of the navigation software or updating the map data
may cause the loss of your user Routes, Tracks and Waypoints. To avoid this inconvenience it is
recommended that you save your Routes, Tracks and Waypoints that you have created.
To access the File Manager window:
> ‘MENU’ 1 sec + “DATABASE” + ‘ENT’+’FILE MANAGER’+’ENT’
You will enter in the File manager, now you can save, load and delete your user data.
To Refresh or Initialize the FileManager press MENU, select one of the two options and press ENT.
The first time that this function is used with a certain card it will be needed to initialize it. Press
MENU in the page and select INITIALIZE.
Note
The Initialization creates a new database file removing all the data stored in the card in case the database file is
already present.
To save user files press ZOOM IN. Edit the name (up to 8 characters) using the left/right cursor
key to select the character to be changed and then up/down cursor key to scroll to the desired
character. Press ‘ENTER’ to accept and to pass to the next field in order to choose the file type to
vbe saved (Routes, Tracks , Waypoints). Once the two fields are selected press ENTER again. A
warning box will appear asking you to confirm the deleting of the file. Press ‘ENTER’ to confirm
or ‘CLEAR’ to cancel. Wait for the STATUS tag at the top of the page to return “Idle”.The function
will save all user data of the selecte type at the moment on the navigator. Multiple saves won’t be
necessary in case of multiple data. (ex. in case there are 500 waypoints in the navigator, an unique
save sill store all of them in an unique file).
After a RAM clear or a software update you can reload previously saved data. To load user files
use the up/down cursor key to scroll to the desired data and press ENT. A warning box will appear
asking you to confirm the loading of the file. Press ‘ENT’ to confirm or ‘ESC’ to cancel.
To permanently delete user files use the up/down cursor key to scroll to the desired data and press
ENT. A warning box will appear asking you to confirm the deleting of the file. Press ‘ENT’ to confirm
or ‘ESC’ to cancel.
Note
It is not possible to overwrite the content of an existing file.