AvMap GeoPilot II Plus - Manual (Page 71)

1
> ‘MENU’ 1 sec + “ALARM SERUP: + ‘ENT’ “AIRSPACE AHEAD ALARM” + ‘ENT’
After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key, select the number desired
and press ‘ENT’.
The default setting is OFF (00.00). In addition, you can select the category of airspace associated
with the alarm. To select the categories:
> ‘MENU’ 1 sec ‘MENU; + “ALARM SETUP”
Use the cursor key to select each category of airspace and turn ON/OFF the alarm for that category.
The time interval set above is for all airspace selected as ON.
ClASS b, CTA on/off
ClASS C, TmA on/off
ToWerS, ConTrol ZoneS on/off
reSTrICTed AreAS on/off
moA And oTher SUA on/off
14.3.7 event log
The Event Log page contains information on Event as Power On, Power Off, GPS Fix Lost, and so
on. For each Event, the Event name, Time and Date are shown.
To Select the Event LOG page:
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “ALARM SETUP” + ‘ENT’ + “EVENT
LOG...” + ‘ENT’
14.3.8 Clear event log
Clears the Event Log memory and starts new:
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “ALARM SETUP” + ‘ENT’ + “CLEAR
EVENT LOG” + ‘ENT’
After pressing ‘ENT’ a window appears: press ‘ENT’ to confirm deletion (or ‘ESC’ to abort function).
The message “DONE” will appear confirming the action.
14.4 TrACK SeT-UP
Track is the actual course traveled, which the Geopilot II Plus can display as a series of connected
dots. The interval setting can be defined by the pilot.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “TRACK SETUP” + ‘ENT’
14.4.1 Track display
Track display On will display track history on the Moving Map. All track data stored in the unit
memory will be displayed. The default setting is Off.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “TRACK SETUP” + ‘ENT’ + “TRACK
DISPLAY” + ‘ENT’
14.4.2 Track line
Defines how the line which represents the track is displayed: Solid or Dashed.
14.4.3 Track Width
Defines the width of the line which represents the track.