AvMap GeoPilot II Plus - Manual (Page 74)

4
default setting is Magnetic.
14.5.9 Coordinate System
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ +
“COORDINATE SYSTEM” + ‘ENT+ ’
Sets the display of the Latitude/Longitude coordinates system among:
ddd mm SS (Degrees, Minutes, Seconds)
ddd mm.mm (Degrees, Minutes - to two decimals)
ddd mm.mmm (Degrees, Minutes - to three decimals)
UTm, oSGb
The default setting is DDD MM.mm.
14.6 dATe & TIme SeT-UP
These functions control how the Geopilot II Plus displays time and date settings.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’
14.6.1 Time format
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’ +
“TIME FORMAT” + ‘ENT’
Using the cursor key select the desired setting and press ‘ENT’.
Time can be displayed as 24/UTC (Zulu time), 12 hour or 24 hour local time. The default setting is
24/UTC. If you select a local time display, continue with the next step.
14.6.2 local Time difference
If you select local time above, you must key in an offset from UTC. The correct time difference must
be entered to calculate the local time.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’ +
“LOCAL TIME DIFFERENCE” + ‘ENT’
After pressing ‘ENT’ a window appears; using the cursor key, select the difference between local
time and UTC to the nearest 30 Minutes. Press ‘ENT’ to activate.
Note
If you are unsure what the time difference is for your area, get a position fix using the UTC format. Display the
Location page and note the displayed time. Compare UTC to your local time and note the difference. Key in the
difference as hours and minutes to the nearest half hour, using a negative value if you are in the western hemisphere
(for example, the difference in New York is -5 hours, or -4 hours on Daylight Savings Time).
14.6.3 data format
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’ +
“DATE FORMAT” + ‘ENT’
The Geopilot II Plus displays dates as MM/DD/YY – Month/Day/Year or DD/MM/YY – Day/Month/