AvMap GeoPilot II Plus - Manual (Page 43)

43
Note
The current leg of the Active Flight Plan is displayed DASHED.
There is the possibility to navigate DIRECT to any FP WP (departure point included).
> ‘GOTO’ + “DIRECT TO FP WAYPOINT” + ‘ENT’
In this case a “D” appears in front of the destination waypoint in the FLIGHT PLAN page.
Note
When there is a DIRECT go to waypoint a menu item “RESYNC DIRECT” is added to the GOTO menu.. With this
option you can resync from your current position to the destination waypoint.
6.4 nAmInG A flIGhT PlAn
The Geopilot II Plus allows you to create a user defined name of 12 alphanumeric characters for
each Flight Plan. This name will appear at the top of the page when viewed and in the Flight Plans
List when viewing all Flight Plans. To edit the default name:
> ‘MENU’ 1 sec. + “FLIGHT PLAN” + ‘ENT’ + ‘MENU’ + “RENAME FP” + ‘ENT’
Use left/right cursor key to select the field and the up/down cursor key to insert the desired name.
At any time in the rename screen, ‘ENT’ will activate the name change.
6.5 CleAr A flIGhT PlAn
This will delete the Flight Plan from the Geopilot II Plus memory enabling another Flight Plan to be
created in this FP number:
> ‘MENU’ 1 sec. + “FLIGHT PLAN” + ‘ENT’ + ‘MENU’ + “CLEAR FP” + ‘ENT’
A Warning window will appear to confirm deletion: press ‘ENT’ to confirm, ‘ESC’ to abort.
6.6 reverSe A flIGhT PlAn
The Flight Plans stored in the Geopilot II Plus memory can be automatically reversed by:
>‘MENU’ 1 sec. + “FLIGHT PLAN” + ‘ENT’ + ‘MENU’ + “REVERSE FP” + ‘ENT’
The message “DONE” will appear to the right of the menu selection and the sequence of the
Waypoints change immediately on the screen.
6.7 GoTo flIGhT PlAnS
A GoTo Flight Plan is a one leg direct Flight Plan to a specified Database object or cursor position
on the Moving Map.
6.7.1 GoTo - database mode
To activate a GoTo Flight Plan within a Database page (see Chapter 8) press ‘GOTO’. Doing this will
deactivate the current Flight Plan and redraw the screen to the Moving Map page. All navigation
information is now related to this object.
To Deactivate the GoTo Flight Plan, from the Moving Map screen press ‘GOTO’. A GoTo Menu box
will appear with the option to deactivate. Pressing “DEACTIVATE FP” will cancel the navigation
data and place the Geopilot II Plus in a Plotter Mode without an active Flight Plan.
If a Flight Plan was active prior to the GOTO, the Flight Plan will resume as active.