AvMap GeoPilot II Plus User Manual

Page 72

Advertising
background image

2

14.4.4 Track Color

Defines the color of the line which represents the track.

14.4.5 Track recording Step

The Geopilot II Plus stores many thousand of points data points to display a pattern of aircraft

movement (Track). After many thousand of points intervals the oldest is deleted with each new

position fix point. The following options assist in getting the most track memory for your type of

flying.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “TRACK SETUP” + ‘ENT’ + “TRACK

RECORDING STEP” + ‘ENT’

distance

- will store a fix point at the specified interval of distance.

Time

- will store a fix point at the specified interval of: 5 sec, 30 sec, 1 min.

Auto

- this allows for the most efficient use of the memory as the software will determine when to

store a fix point based on straight and curved flight paths.

The default setting is Auto.

14.4.6 Clear Track

Deletes all of the Track history and begins new.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “TRACK SETUP” + ‘ENT’ + “CLEAR

TRACK” + ‘ENT’

After pressing ‘ENT’ a window appears; press ‘ENT’ to confirm deletion or ‘ESC’ to abort function.

The message “DONE” will appear confirming the action.

14.4.7 remaining Track

The remaining track memory is displayed on the Track Setup Menu page. The number displayed

will be points, time, or distance based on the recording step selection.

14.5 UnITS SeT-UP

This sub-menu contains the various options that define how the Geopilot II Plus displays units of

measurement.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’

14.5.1 distance Unit

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “DISTANCE”

+ ‘ENT’

Distance measurements can be displayed in Statute Miles (SM), Nautical Miles (NM) or kilometers

(KM). The default setting is NM.

14.5.2 Speed Units

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “SPEED”

+ ‘ENT’

Speed measurements can be displayed in miles per hour (MPH), Knots (KTS) or kilometers per hour

(KMH). The default setting is Knots.

Advertising