AvMap GeoPilot II Plus - Manual (Page 68)

68
level - a letter associated with C-MAP’s chart cell level is displayed.
WIdTh - the width of the screen is displayed.
Use the cursor key to select and ‘ENT’ to accept. The default setting is Bar.
14.1.3 language
Selects the language in which you wish menu information to be displayed (i.e. screen labels, menus
and options). Map detail will remain in English.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “GENERAL SETUP” ‘ENT’ +
“LANGUAGE” + ‘ENT’
Use the cursor key to select and ‘ENT’ to accept. The default setting is English.
14.1.4 military frequency
The display of Military Frequency data can be set to ON or OFF (this data is found in European
Database cards).
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “GENERAL SETUP” + ‘ENT’ + “MILITARY
FREQUENCY” + ‘ENTER’
Use the cursor key to select and ‘ENT’ to accept. The default setting is Off.
14.1.5 Terrain legend
Enables/Disables the legend box in the lower left corner of the display when in the MOVING MAP
MENU any of the TAWS features is selected. one of the R-A-M mounting options.
14.1.6 data Window Color
This setting controls the background color of the data window display.
14.1.7 menu Color
This setting controls the background color of menus display.
14.2 fIx SeT-UP
The Fix Setup sub-menu contains options relating to GPS data input and display.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’
14.2.1 fix Source
The Geopilot II Plus uses positioning information provided by the internal GPS-receiver or by an
external NMEA 0183, external Air Data, or External RNAVdata string.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “FIX SOURCE”
+ ‘ENT’
Use the cursor key to select and ‘ENTER’ to accept. When connecting the Geopilot II Plus to an
external source, be sure the data output of the external device is set for the correct format (see Sec.
2.5). The default setting is Internal GPS.
14.2.2 differential Correction Source
The Geopilot II Plus can be connected to a DGPS Beacon Receiver that sends RTCM-104 data. To
select the Differential Correction source:
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “DIFFERENTIAL