Bobbin winding, Bobbin winding -22 – Kenmore 385.15408 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Bobbin Winding
• Removing bobbin case
Remove the extension table from the machine by pulling
it to the left. Open the shuttie cover©by pulling down
the embossed part on the left of the cover.
Raise the needle to its highest position by rotating the
handwheel toward you.
© Shuttle cover
© Bobbin case
To remove the bobbin case ©from the shuttle, pull open
the latch of the bobbin case. Pull the bobbin case straight
out of the shuttle.
• Bobbin winding
: ^
^ ^
© Release the clutch by puliing out the handwheel. This
will stop the neeclleifrom moving while you wind the
bobbin,
m
©
© Draw thread from the spool.
©Guide the thread around the thread guide.
©Thread through the hoie in the bobbin from the inside to
the outside.
© Put the bobbin on the bobbin winder spindle.
18