Oiling the machine – Kenmore 385.15408 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Oiling the Machine
NOTE:
Unplug the machine before oiling.
• Oil behind the face cover
Open the face cover and oil the two points, as shown, at
least once a year. One or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain the fabric. In
case the machine has not been used for a long period, oil it
before sewing. Use quality sewing machine oil.
• Oil the shuttle area
Open the shuttle cover by pulling down the embossed
part on the left side of the cover, i i :
Oil the point as indicated ih the iltustration. One or two
drops of oil is sufficient. : ; : -
62
Advertising
This manual is related to the following products: