To drop or raise the feed dogs, Darning – Kenmore 385.15408 User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To Drop or Raise the Feed Dogs

(T) To drop the feed dogs, press the lever in the direction of

the arrow, as illustrated.

@ To raise the feed dogs, push the lever in the direction of

the arrow, as illustrated, and turn handwheel towards
you. Feed dogs must be up for norma! sewing.

Darning

® stitch pattern selector:
(2) Presser foot:
(3) Needle thread tension:
0 Stitch length dial:
(5) Stitch width dial:.:v; ■
© Feed dogs i i

1 or 2

Removed.......

..1 to4
.Any

:

; sS (0) or'W(5)i:

Dropped

ih

Drop the feed dogs (see above) arid remove the presser

foot. Center the hole in the-fabric on an embroidery hoop,

as shown. Lower the presser bar and sew at a slow speed.
Move the fabric back and forth slowly until the darning area
is covered. Turn the fabric a 1/4 turn (901), and sew
another layer of stitching over the first layer.

NOTE:

If the fabric is thin or badly damaged, use a separate
piece of fabric under the hole to reinforce it._____________

38

Advertising
This manual is related to the following products: