Clover Electronics CDR 4170 User Manual
Page 38
5.10.1.1 PASSWORD
• Select
the
PASSWORD in the DVR ACCOUNT menu by using UP/DOWN buttons.
• Select
ON or OFF by using the ENTER button.
• If
ON is selected, the password has to be entered to get into the following mode.
Setup mode, Search mode, Record mode, Record stop mode, PTZ mode and System
Log mode.
• The password must be 8 digits.
5.10.1.2 PASSWORD CHANGE
• Select
the
PASSWORD CHANGE in the DVR ACCOUNT menu by using UP/DOWN
buttons.
• Press the ENTER button and you will be requested to enter the current password as
below.
• Enter the current password by using CH1 (number 1), CH2 (number 2), CH3 (number 3)
and CH4 (number 4) buttons. If the entered password is incorrect, user cannot create a
new password. If the password is correct, you will be requested to enter a new password
and to confirm as below.
- 33 -
• Press
the
ENTER button to save the newly created password to the system.
5.10.2 NETWORK ACCOUNT SET
• Select
the
NETWORK ACCOUNT SET in the ACCOUNT menu by using UP/DOWN
buttons.
- 33 -