Clover Electronics CDR 4170 - Manual (Page 55)

10. QUAD BUTTON
• Click the Quad button to display the quadrant pictures.
11. AUTO BUTTON
• The GUI will be viewed a full screen at a time in a continuous sequence (one
camera after another) by clicking this button.
• The dwell time can be set from 1 to 10 seconds in the SETUP menu on the GUI.
• The sequencing order: CH1->CH2->CH3->CH4->QUAD.
12. POP
• It stands for Picture of Picture.
• Click the POP button, and it will be displayed a medium screen and 3 small screens.
13. PIP
• It stands for Picture In picture.
• Click
the PIP button, and it will be displayed 3 PIPs on a full screen.
14. SETUP
Click the SETUP button on the GUI, and it will be appeared the following window that can
change the values in regards to DVR.
• Time/Date: Shows the current time on the computer. After changing the values, press
the Update Time/Date button on the right side to save the values. This function does not
affect the DVR.
• REC. Quality: Shows the REC Quality values on the DVR. Change the values on the
window and press the Update REC.Quality button to save them. You can change the
values on the DVR related to the Continuous Recording and Alarm Recording.
• REC. Speed: Shows the REC Speed values on the DVR. Change the values on the
window and press the Update REC. Speed button to save them. You can change the
values on the DVR related to the Continuous Recording and Alarm Recording.
• REC. Resolution: Shows the REC Resolution values on the DVR. Change the values
- 50 -