Clover Electronics CDR 4170 - Manual (Page 54)

Select Channel
Reset button
7. PRINT
• Click the PRINT button to print the current pictures shown on the GUI and then the
following window pops up along with “WAIT…”. Please wait a couple of seconds
until the system loads data to print.
8. REC
• Click the REC button to start or stop recording. User can switch ON or OFF
recording from a remote location through the network when the DVR is in the
recording mode.
• When the system is in the recording mode, the button will turn red in color.
• If not recording, the button turns green in color.
9. CHANNEL SELECTION BUTTONS
• You can see a channel in full screen by clicking one of the channel selection
buttons.
- 49 -