Clover Electronics CDR 4170 - Manual (Page 56)

on the window and press the Update REC.Quality button to save them.
• Installed HDD and Recording HDD: Shows currently installed HDD information such as
connection information, whole capacity and used space. It shows currently being
recorded HDD as well. Do not change the recording HDD as possible as you can.
• Water Mark (on the GUI): The WATER MARK allows you to verify if an original image
bas been altered. Click the WATER MARK ON to put the WATER MARK on the original
images. If the WATER MARK on the original images is being broken in the playback
mode, the images have been altered. If not, the images have not been altered.
This function does not affect the DVR.
• Dwell. Time: It can be adjusted from 1 to 10 seconds (See #11. AUTO BUTTON for
more details). This function does not affect the DVR.
• Firmware information: Current product’s firmware version and time when it was updated.
NOTE
If you connect the DVR through the GUI as a guest, you cannot change the
values. It allows a guest to monitor only.
15. SEARCH
Click the SEARCH button, and it will be displayed the following window.
• The last record list
Select The last record list on the search window and press OK. It will replay from the
beginning of the last list that recorded on HDD.
• The whole REC Lists
Select The whole REC Lists on the search window and press OK. The following Window
will be displayed.
- 51 -