Operation of remote control unit loading batteries, Deration – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation of remote control unit
Loading batteries
UD-7D3/753 fEn]
Remove the cover.
Insert batteries.
• Insert two R03 ("AAA"-size) batteries following the polarity indications.
Close the cover.
deration
After plugging in the power cord of the amplifier, press the
POWER key of the remote control unit to turn the power of the
system ON. When the power is turned ON, press the key of the
function to be operated.
•When pressing more than one remote control key successively, press the
keys securely by leaving an interval of 1 second or more between keys.
In this manual, the remote control unit is illustrated with its cover
omitted. This is simply for the convenience of explanation.
I Not^l
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight orthe light of a high-frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur.
In such a case, change the installation position to avoid malfunction.