Connection of parallel cord, Connection of the front speakers – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection of the front speakers
UD-7D3/753 (En)
----- Tweeter
(for high frequencies)
Tweeter ----------------------
(for medium and
high frequencies)
----- Mid-range unit
(for medium frequencies)
Tweeter _______________
(for medium and
high frequencies)
if
\y\/nnfo|-
(for low frequencies)
(for low frequencies)
M
Speaker rear panels
LS-F7: For other countries
LS-F5: For U.S.A. and Canada
• Never short-circuit the + and - speaker cords.
■ If the left and right speaker connections or the + and - polarity are inverted, the sound will be unnatural with unclear positioning of musical instruments, etc.
Be sure to connect them without mistake.
Connection of parallel cord
1
........
1.....‘^■■■■'mnii III lini ^
•When connecting the parallel cord, insert the plug straight into the
connector until it clicks to lock them securely.
•When connecting the parallel cord, the wire with white line should come
to the left side end.
•When disconnecting the parallel cord, push in the two sides of the plug
and pull it straight out.