Kenwood COMPACT DISC DIGITAL AUDIO UD-703 - Manual (Page 23)

u
UD-703 only
For the operation of UD-753: to
UD-703/753 [En]
Auto space function |
When the SPACE key is pressed during programming of tracks, a non-
recorded space of a few seconds will be created between tracks. By
recording tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by searching the
non-recorded spaces) can be performed reliably.
• Even when the performances of two tracks are continuous (which occurs
with classical or live recording music), the spaces will be created if they
have different track Nos.
• The displayed total playing time will include these non-recorded spaces.
• To cancel the auto space function, press the P. MODE key or the SPACE
key again.
To check the programmed tracks [ Remote control unit oniy | QQI lights.
CHECK
filili
I // ■ ^ 5 P -
BE u
• Each time the key is pressed, the program No. (P-NO) and the track No.
on CD are displayed.
• The previous display resumes in a few seconds.
To adda track to the program
• When a track No. is entered, the track will be added to the end of the
existing program.
To change a track in the program \ Remote control unit only |
¡lights.
NO
U S p - b e
• Press while the P.C. indicator is lit.
•The track being played cannot be changed.
To clear tracks from the program
• Each time the key is pressed, the last track in the program is cleared.
• The track being played cannot be changed.
•The entire program is cleared.