Jlmerpivgianjimi, Timer operation – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer operation
Two 24-hour timer systems (PROG.1, PROG.2) (which can be
used every day) and a sleep timer system (which works only
once) are available.
In each of PROG.1 and PROG.2, the timer data including the
operating period and played contents can be set and selected
to be activated or not as required.
Timer reservation is possible for the two types PROG.1
and PROG.2 at the same time.
• Please make reservations with an interval of at least one
minute, so that the operation times of PROG.1 and PROG.2 do
not overlap.
Jlmerpivgianjimi^^^^
UD-703/753 [En]
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played
(or radio broadcast can be recorded) in the previously set time period.
Al timer playback (PROG.1, PROG.2)
When timer playback starts, the volume increases gradually.
Sleep timer
The power is turned OFF automatically after the specified period has
elapsed.
Make preparations for the play (recording).
•To listen to radio
•To listen to CD
•To listen to tape
•Playing the auxiliary
•For broadcast
input source
recordings
The station should be
Insert a disc.
Insert a tape.
Set the timer for the
Make prepara
preset before timer pro
(Program playback is not pos
component connected
tions for record
gramming.
sible.)
r®)a
to the input jacks such
ing. -S4SQ
as MD or VIDEO.
i-.ddooo
The CD must be loaded in
if tapes are inserted
in both
disc bank No. 1; otherwise
decks A and B, playback starts
timer playback will not be
with the tape in deck B.
possible. (UD-753)
Adjust the listening volume.
• When recording a broadcast, the listening volume is automatically set to
the minimum at the moment the power is turned ON by the timer.
Set the POWER switch to OFF (STANDBY) position.
A //
on
/
st
;
I
I
Select a program No.
Press immediately after selection.]
&
•The selected program No. lights.
• if a program No. under which a timer program has already been reserved,
it is replaced by the new timer program.
Each press of the key switches the program numbers as follows.
r
© PROG.1
(Program 1)
© PROG.2
(Program 2)
© Normal operation