Preparation, Timed edit recording – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timed edit recording
By specifying the recording time of the tape used, CD tracks can
be recorded with their order automatically changed so that no
i tune is interrupted at the end of tape sides A and B.
I
If there are favorite CD tracks to be recorded in priority over
others, they can be recorded in the beginning of tape by
programming them. (Priority edit function)
Preparation
• Load a cassette tape in the deck B.
• Select the tape transport direction (-• or ►).
• Select "
c
I
d
".(two-side recording).
• Select the Dolby NR mode.
I
•Select the
“CD”
input. |
• Insert a disc in the CD player.
UD-703/753 CEn)
UD-703 only
For the operation of UD-753: “Q2 to “1^
JC---------------------- T---------------
. O 'sJ'i' „“AVooo _
1 -----------------
r
. „
I
Select the CD tracks to be recorded in priority
(Priority editing)
(Go to step S if this operation is not required.)
O Check that the "PGM" indicator is lit.
O Enter CD track Nos.
Press the numeric keys as shown below...
To enter track Nos. 2:
To enter track Nos. 25: (HUBill
To check the edited contents
To clear the edited contents
• The
REPEAT
key is invalid.
Light the "EDIT" indicator.
EDtT MODE
l=c^
Enter the recording length of the tape.
Start edit recording.
Go to step El within 8 seconds^
If more than 8 seconds have elapsed, select the mode again.
Press so that the “EDir’ indicator lights.
• To use the auto-space function, press the
SPACE
key after having
pressed the
EDIT MODE
key and go to step
S.
To cancel the auto-space
function, press the
P, MODE
key and restart the recording procedure from
the beginning.
Press the numeric keys as shown below.
30-minute tape i [TiÙÌ [Tio] piò] [o]
46-minute tape : f+io] f+ioi rPìòì is]
46-, 54-, 60- or 90-minute tapes can be selected simply by pressing the
TIME
key for the required number of times, (The recording time can be
adjusted in 1-minute steps with the and keys.)
After entry, press the
EDIT MODE
key then proceed to step □.
• Up to 32 tracks can be edited.
• CD tracks will be edited automatically onto tape sides A and B, After
editing, the
“EDIT”
indicator stops blinking and starts to light steadily.
• The recording level and bias will be adjusted automatically in approx. 90
seconds (variable depending on CD contents), after which recording
starts.
•The tape and CD stop automatically when recording has completed.