Connection method, Connection of am ioop antenna, Connection of am outdoor antenna – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 6: Connection of amantenna, Connection offm antenna
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UD-703/753 [En]
Connection method
O
Push the lever.
© Insert cord.
© Return the lever.
■jLl
Tuner unit C-F7/C-F7L
^1©
G ^
Connection of AMantenna
Connection of AM ioop antenna
The provided antenna is for indoor use. Place it in a position as far as possible
from this system, TV, speaker cords and power cord and set to the
orientation which provides the best reception condition.
Connection of AM outdoor antenna
If the reception condition is poor with the loop antenna alone, connect a
vinyl coated wire of more than 6 m {20 ft) and extend it outdoors while
leaving the loop antenna connected.
For U.K, and Europe
Except for U.K. and Europe
Connection ofFM antenna
Tuner unit C-F7/C-7L
Connection of FM simplified antenna
Connection of FM outdoor antenna
The accessory antenna is for temporary indoor use only. For stable signal
Lead the antenna wire indoors using a 75 £2 coaxial cable and connect it to
reception we recommend using an outdoor antenna. Remove the indoor
the FM 75 £2 connector,
antenna if you connect one outdoors.
For U.K. and Europe
O Remove the coating from the cord tip
section and twist conductors.
© Find the location providing the best re
ceiving condition.
When a T-shaped, FM indoor antenna (300 Q)
© Fix the antenna there.
which is marketed in audio stores is used, connect
it to these terminals. (In this case, disconnect the
provided FM simplified antenna.)