Preparation, Broadcast reception, Receiving broadcast station – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 38: B 1 . 5 0
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Broadcast reception
It is possible to receive broadcasts by one-touch operations by
storing up to 40 stations in the preset m em ory.
Preparation
•
Select the “TUNER” input.
UD-703/753 [En]
1 L -1
_ 4
_ °o°oVi
looa
0®® oVoVO®
^g^oob, .v.v
‘«1 OO [email protected] _
Receiving broadcast station
Select the broadcast band.
Select a station.
II -
1^0«® .v.vooa^
TUNING
O'
To decrease
To increase
frequency
frequency
Each press alternates the band,
r- (DF-tl
L- (^Rtl (For U.K. tIR
B 1 . 5 0 ,
Each press alternates the mode,
p- (DAUTO lit (Auto tuning)
L (DAUTO not lit (Manual tuning)
Lights.
07,5/7..
• Normally, use the AUTO (Auto tuning) mode.
Use the manual tuning mode when reception is noisy due to weak
reception. (In the manual mode, stereo broadcasts are received in
monaural.)
The ‘TUNED" indicator lights
when a station is received.
AUT^^NW^TiRSC
00.00
Frequency display
Lights during
stereo reception.
Auto tuning
: Every time the control is rotated, a next station
will be received.
Manual tuning : Frequencies vary continuously while the con
trol is kept rotated.
DlSPlAYkey
Every time the
DISPLAY
key is pressed, the display contents change.
Each press changes the display as follows.
(T) Frequency display; The frequency being received is displayed.
I— (D Clock display : When an operation related to turning is done,
these change to the frequency display for a few
seconds.
•While the power is OFF, the display shows time of the day.
F or the E urope and U .K . m odels, read the attached booklet.