Preparation, To stop playback, To return to playback in order of track nos – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 29: Programming tracks in desired order
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming tracks in desired order
UD-753 only
For the operation of UD-703:
to -p
Use the following procedure to select desired tracks (up to 32
tracks) from up to 6 discs and program them in the desired
order.
Preparation
• Select the
“CD”
input.
• Load discs in the CD player.
Press
SO
that the “PGM" indicator lights.
To select tracks from more than one CD, repeat
steps
O
and 0 above.
Start playback
Displays the entered track No.
6*
N0.'^ ^
™u|KNO.
^£/P
P - D 1
• Up to 32 tracks can be programmed When
"FUL L
" is displayed, no more
tracks can be programmed.
• If you make a mistake, press the
CLEAR
key and enter the track No. from
the beginning.
• If the track No. is not selected within 8 seconds after having selected the
disc No., all of the tracks on the disc will be programmed.
• If a disc No. which is not present in the magazine is entered, it is
programmed temporarily but canceled at the time of playback.
• Tracks will be played in the order they were programmed (in order of P
Nos.).
• When the or key is pressed during playback, the track will be
skipped in the direction of the pressed button.
To Stop playback
To return to playback in order of track Nos.
UH
• Playback in the original order of tracks starts with the track being played.