Fade edit recording – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 58
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fade edit recording
The tune interrupted at the end of tape side A is faded out and
side B starts with fading in from the middle of that tune. The
I tune interrupted at the end of tape side B is simply faded out.
UD-703/753 [En]
UD-753 only
For the operation of UD-703:
to -ilil
Preparation
• Load a cassette tape in the deck B.
• Select the tape transport direction (◄ or *
• Select
(two-side recording).
• Select the Dolby NR mode.
I •Select the
“CD”
input. |
• Insert a disc(s) in the CD player.
Press so that the "PGM" indicator goes off.
Should be OFF.
D : D D
12
3 4 5
6 7 a 9 10
11 12 13 14 15
16 17 IB 19 20
Selected disc No.
12
3 4
/ n /
I U I
n- nn
U‘ uu
• The recording level and bias will be adjusted automatically in approx. 90
seconds (variable depending on CD contents), after which recording
starts.
• The CD tracks are recorded in the order they are recorded on the CD.
• The tape and CD stop automatically when recording has completed.
rrj—
—I
1
. When the
CCRS
key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts,
2. The automatic recording level setting operation in the edit recording utilizes a section suitable for this purpose in the CD present in the CD
player.
3. Edit recording is not possible with CDs containing a track that is longer than one tape side, which may occur with classical music, etc.
4. If the deck is set for one-side recording (=t), the processing at the tape end is applied only on side A,
5. When the last tune of tape side B is faded out, the ending part of the last but one tune may sometimes be faded out if the space between
it and the last tune is short.