Comtrol Modbus TCP User Guide - Manual (Page 62)

62 - Chapter 4. Diagnostic and Statistics Pages DeviceMaster UP Modbus/TCP User Guide: 2000447 Rev. I
Communication Statistics
4.1. Communication Statistics
The top portion of this page provides links to other pages.
Note: The refresh rate on this page is set to 20 seconds. To stop the page refresh, select Refresh in your browser.
To restart refreshing the page display; exit and return to this page.
Serial Device Interfaces Statistics (Top)
Yes/No Toggles to display or not to display serial statistics.
Reset Statistics Clears the serial port statistics, which sets the value to 0 for all ports.
TX Byte Count Displays the number of bytes sent out of the serial port.
TX Pkt Count Displays the number of serial packets sent out of the serial port.
RX Byte Count Displays the number of bytes received over the serial port.
RX Pkt Count Displays the number of packets received over the serial port.
Parity Error Count Displays the number of received serial packets dropped due to parity errors.
Framing Error Count Displays the number of received serial packets dropped due to framing errors.
Overrun Error Count
Displays the number of received serial packets dropped due to overrun error
incidents.