Comtrol Modbus TCP User Guide User Manual
Page 96
Advertising
96 - Appendix A. Programming the PLC via Concept
DeviceMaster UP Modbus/TCP User Guide: 2000447 Rev. I
Setting up and Running the Concept Example Programs
13. Import the configuration by selecting File->Import…
a.
In the Select Source File Format pane, select Configuration.
b.
Select OK.
c.
In the Configuration Import pane, select the .CCF file.
d.
Select OK.
e.
Select OK in the Configuration Import completed pane.
14. Import the program sections by selecting File->Import…
a.
In the Select Source File Format pane, select Program Section(s).
b.
Select OK.
c.
In the select section_file pane, select the .SEC file.
d.
Select OK.
e.
Select YES when asked whether to save project file first.
Advertising