Comtrol Modbus TCP User Guide User Manual
Page 97
Advertising
DeviceMaster UP Modbus/TCP User Guide: 2000447 Rev. I
Appendix A. Programming the PLC via Concept- 97
Setting up and Running the Concept Example Programs
f.
In the Replacement pane, select OK.
g.
Select OK in the status window.
15. Modify the configuration for your PLC.
a.
Select Project->Configurator.
In the PLC Selection pane:
b.
Select your PLC Family.
c.
Select your CPU/Executive.
d.
Select your Memory Size.
Advertising