Comtrol Modbus TCP User Guide - Manual (Page 99)

DeviceMaster UP Modbus/TCP User Guide: 2000447 Rev. I Appendix A. Programming the PLC via Concept- 99
Setting up and Running the Concept Example Programs
c. Select OK.
18. Modify the DeviceMaster UP IP Address in the DeviceMaster_IP_Addr array:
a. Select Project->Variable Declarations…
b. Click on the variable DeviceMaster_IP_Addr->Set…, which is the slot/device index number.
For the Schneider Electric Momentum PLC, the first word does not change.
For the Schneider Electric Quantum or Compact PLC, set the upper eight bits to the slot number of
the Ethernet module.
c. WORDS two through five contain the IP address in the standard 255.255.255.255 mask format.