Restoring serial port settings, Ns-link com port, Socket port – Comtrol 500 DeviceMaster User Manual
Page 47: Ns-link com port socket port
DeviceMaster 500 User Guide: 2000501 Rev. A
Managing the DeviceMaster 500 - 47
Managing the DeviceMaster 500
6.
Transfer all cabling from the old DeviceMaster 500 to the new DeviceMaster
500.
7.
Restart the host PC.
Restoring Serial Port Settings
Use the web page and/or the NS-Link device driver for Windows to restore the
serial port settings to their default values.
The NS-Link serial port settings are independent of the socket serial port settings
on the web page. If you are using COM ports and also have configured the port for
socket services, you must restore the default port settings in the driver and web
page.
NS-Link COM Port
Click Defaults (and if appropriate, Clone) and Ok in the NS-Link COM Properties
screen to reset the serial port settings.
If necessary, refer to the
(also available on the
CD) for additional information about NS-Link.
Socket Port
Use the following procedure to reset the socket port serial settings.
1.
Open the DeviceMaster 500 web page (
Accessing Socket Configuration
39).
2.
Scroll to the bottom of the Server Configuration page and click Reboot.
3.
Click Set configuration for all ports to factory default settings and the click Yes,
Reboot.