Comtrol 500 DeviceMaster - Manual (Page 60)

60 - DeviceMaster 500 User Guide: 2000501 Rev. A Hardware Specifications
Hardware Specifications
Serial Communications
This table provides DeviceMaster 500 serial communications specifications.
Serial Communications
Interface RS-232, RS-422, and RS-485
Serial connector types:
1-Port standard
1-Port embedded
4-Port
DB9 Male
Header, IDC10
DB9
Baud rate/port
Receive buffer
Transmit buffer
9600, 57.5K, and 500K bps
1024 bytes
256 bytes
NS-Link control:
Data bits
Parity
Stop bits
Flow control
7 or 8
Odd, even, none
1 or 2
Hardware or software
Network default values:
IP address
Subnet mask
Gateway
192.168.250.250
255.255.0.0
192.168.250.1
Network protocols
TCP/IP and UDP Socket services,
BOOTP, TFTP, ICMP, ARP,
SNMP (MIB-II), Telnet, HTTP,
DHCP/RARP/Ping, RFC 1006
Event notification SocketServer
SNMP support Monitoring only