Configuring passwords – Comtrol 500 DeviceMaster User Manual
Page 56
56 - RedBoot Procedures
DeviceMaster 500 User Guide: 2000501 Rev. A
RedBoot Procedures
If uploading SocketServer:
a.
At the RedBoot> prompt, type: fis list and press Enter.
Note: You should see file information for a file called default. If you do not
see this file, repeat the process starting with
.
b.
Reset the DeviceMaster 500 by typing reset at the RedBoot> prompt.
Note: In a few seconds the ethernet and PWR LEDs cycle through a light
sequence once.
c.
Start your internet browser and enter the IP address of the DeviceMaster
500 to verify that the new version of SocketServer loads.
Configuring Passwords
This section discusses how to configure a password for the web and telnet server.
Note: See the PortVision Plus or socket Help system for information about email
notification.
Use the following procedure to establish the DeviceMaster 500 password for the
Web and telnet server. Establishing a password prevents unauthorized changes to
the DeviceMaster 500 configuration.
1.
Establish communications with the DeviceMaster 500 using the serial (Page
53) or telnet method (Page 50).
2.
Type password [your_password] and press Enter.
Note: If you forget your password, you can reprogram the password using the
serial method which bypasses the password.
Note: The Bootloader version on your DeviceMaster 500 may be different than
the version displayed in this graphic.
See the auth command in the
on Page 57 if you want
to set up Web browser authentication.
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
FIS_directory 0x053F0000 0x053F0000 0x00010000 0x00000000
default 0x05030000 0x00000000 0x00090000 0x00000000
RedBoot>
Password:
*********************************************
**
** Comtrol DeviceMaster Bootloader Version 3.05
** RedBoot(tm) environment - built 08:13:02, Apr 4 2008
** Platform: Comtrol DeviceMaster (ARM 7TDMI)
** Portions Copyright (C) 2000. Red Hat, Inc.
** Portions Copyright (C) 2001-2008 Comtrol Corp.
*********************************************
FLASH: 64 blocks of 65536 bytes each
FLASH: 4194304 bytes (0x05000000 - 0x05400000)
RAM: 8126464 bytes (0x00000000 - 0x007c0000)
RedBoot> dis
Loading disabled
RedBoot> password dev1357
Password ‘dev1357’
RedBoot>