Futaba 12FG - Manual (Page 11)

11
<Before Use>
• HT6F1700B Transmitter battery pack - the (1700mAh) transmitter Ni-MH battery pack may be easily
H[FKDQJHGZLWKDIUHVKRQHWRSURYLGHHQRXJKFDSDFLW\IRUH[WHQGHGÀ\LQJVHVVLRQV
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by
placing the instructor on a separate transmitter. Note that the T12FG transmitter may be connected to
another T12FG system, as well as to any other models of Futaba transmitters. The T12FG transmitter uses
one of the three cord plug types according to the transmitter connected. (Refer to the description at the
TRAINER function instructions)
• Neckstrap - a neckstrap may be connected to your T12FG system to make it easier to handle and improve
\RXUÀ\LQJSUHFLVLRQVLQFH\RXUKDQGVZRQ¶WQHHGWRVXSSRUWWKHWUDQVPLWWHU¶VZHLJKW
• Y-harnesses, servo extensions, etc - Genuine Futaba extensions and Y-harnesses, including a heavy-duty
version with heavier wire, are available to aid in your larger model and other installations.
• Gyros - a variety of genuine Futaba gyros is available for your aircraft or helicopter needs.
‡*RYHUQRU *9 IRUKHOLFRSWHUXVH$XWRPDWLFDOO\DGMXVWVWKURWWOHVHUYRSRVLWLRQWRPDLQWDLQDFRQVWDQW
head speed regardless of blade pitch, load, weather, etc.
• DSC Cord - allows setup and testing without transmitting. With your Transmitter and Receiver off, plug
cord into trainer port and then, into the receiver Battery/DSC (B/C) slot. All programming and setup may
be done in this manner without transmitting.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for
PCM-G3, PCM1024, or FM/PPM types are available.)
• Optional Charger - Futaba CR-2000 Ni-MH/Ni-Cd Transmitter/Receiver Battery Charger.
The following additional accessories are available from your dealer. Refer to a Futaba catalog for
more information: