Futaba 12FG - Manual (Page 122)

122
<Data>
Operations related to servo speed
Servo speed setting
The servo speed at each function operation
(including flight condition switching) can be
adjusted. The servos operate smoothly at a
fixed speed corresponding to the set speed. The
operating speed (IN side) and return speed (OUT
side) can be set individually.
Switch the operation mode according to the set
function.
"SYM." mode: Used with ailerons and other
self neutral functions.
"LIN." mode: Used with functions which hold
the operation position of the throttle and
switch channel, etc.
[Setting method]
1. Use the EDIT dial to move the cursor
(reverse-video) to the [MODE] item and
push the EDIT button to switch to the data
input mode.
Turn the EDIT dial to the left or right and
switch to the operation mode ("SYM." or
"LIN.") corresponding to the set function
and push the EDIT button.
2. Move the cursor to the direction ([IN] or
[OUT]) item you want to set and push the
EDIT button to switch to the data input
mode.
Turn the EDIT dial to the left or right and set
the speed.
Initial value: 0
Adjustment range: 0~27 (maximum delay)
(When the EDIT button is pushed for 1 second, the servo
speed is reset to the initial value.)
Push the EDIT button to end adjustment
and return to the edit mode.