Futaba 12FG - Manual (Page 28)

28
<Functions of System Menu>
TRAINER 7UDLQHUV\VWHPVWDUWLQJDQGVHWWLQJ
The Trainer function makes it possible for the
instructor to choose which functions and channels
are to be used for instruction, making it possible to
match the training ability to the student's skill level.
Two transmitters must be connected by an optional
Trainer Cord, and the Instructor's transmitter should
be programmed for trainer operation, as described
below.
When the Instructor activates the trainer switch,
the student has control of the aircraft (if MIX or
FUNC mode is turned on, the Instructor can make
corrections while the student has control). When
the switch is released the Instructor regains control.
This is very useful if the student gets the aircraft
into an undesirable situation.
NOTE: This trainer system can be used in the
following manner;
1. With the T12FG transmitter and a conventional
transmitter, if the channel order is different. It
is necessary to match the channel order in
the Function setting screen when connecting
it with other than a T12FG.
2. When the T12FG is used as the Teacher, set the
modulation mode of the student’s transmitter
to PPM. If being used as the student, set the
T12FG to the modulation mode specified by
the Instructor's transmitter. When the Instructor's
transmitter is a T14MZ, 12Z, 12FG, T9Z, T9C or
T7C transmitter, it should be switched to PPM
mode.
3. Be sure that all channels work correctly in
ERWKWUDQVPLWWHUVEHIRUHÁ\LQJ
T12FG special trainer cable
Use the T12FG special trainer cable when using the T12FG transmitter at the trainer
function instructor side. Operation may not be normal with a conventional trainer cable.
*When the T12FG transmitter is used at the student side when the instructor side transmitter is not a T12FG, a
conventional trainer cable may be used.
,QVWUXFWRU VWXGHQW 7UDLQHUFDEOH
7)*
7(;7(;7&7 & 7)*VSHFLDOWUDLQHUFDEOH
7=70=); &RQYHQWLRQDOWUDLQHUFDEOH 5HFW5HFW
79 &RQYHQWLRQDOWUDLQHUFDEOH 5HFW5RXQG
7;7878DQG7 =DUHQRWDSSOLFDEOH
2WKHUWKDQ
7)*
7)*
&RQYHQWLRQDOWUDLQHUFDEOH 5HFW5HFW RU
&RQYHQWLRQDOWUDLQHUFDEOH 5HFW5RXQG
*The direction that the T12FG special trainer cable connects is fixed. Connect the
instructor side connector of the cable to the instructor T12FG and connect the student side
connector to the student transmitter. If the cable is connected in reverse, the student side
power will not be turned on even if the instructor side power is set to ON.
*If the instructor side T12FG trainer function is not enabled, the student side power will
not be turned on even if the connection direction is correct.