Canon W8400 - Manual (Page 108)

2- 47
‹ Using the Media Take-up Unit
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Settings for Using the Media Take-up
Unit
1
Press the Online button to display MAIN
MENU on the printer.
2
Press [ ] or [ ] to select Take-up Reel,
and then press [ ].
3
Press [ ] or [ ] to select Enable, and then
press the OK button.
(=) will be displayed to the left of the set value, and
the media take-up unit will be set.
Attaching Roll Media
1
Set the spool mode switch on the media
take-up unit to Manual.
2
If using the output stacker, remove the two
basket rods at the front, and roll up the stacker
cloth while placing it at the back of the stopper
at the bottom the stand, and then pull the
stacker arm towards you and fold it up.
Make sure that the stacker rods and cloth do not
crush the sensor.
MAIN MENU
Take-up Reel
Take-up Reel
Enable
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)