Settings required for borderless printing, P.3-78, Ng, refer to – Canon W8400 User Manual
Page 195: Chapter 3 “printing photos and, Index contents
3- 78
Printing from a Macintosh
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Printing Photos and Illustrations without
Borders (Borderless Printing)
Normally a printed document has white space around its
edges (margins), but a borderless print for a photograph or
created image has no white space at its borders; its entire
surface is covered by printing.
Settings Required for Borderless Printing
Before printing, check that the paper corresponding to
borderless printing has been loaded to the printer.
Borderless printing is possible with this printer only if roll
media is used in the paper feed.
Here is a list of the types of roll media and their widths
that can be used for borderless printing.
Important
z
Paper of types and roll widths other than those listed
above cannot be used for borderless printing.
z
If a flat cutter has been loaded to the printer in use, the
following types of paper cannot be cut, so borderless
printing will be performed at the left and right edges only.
Premium Matte Paper, Fine Art Photo, Fine Art
Heavyweight Photo, Fine Art Textured, Canvas Matte
z
Manually remove paper from the ejection guide and
output stacker after cutting such media as trimmed paper
and pre-cut paper.
When you do borderless printing, be sure to select
Enlarged/Reduced Printing on the Finishing panel
(Page Setup for OS 8/9). This allows Borderless
printing to be performed.
Important
z
Borderless printing cannot be performed under the
following conditions.
Paper Type
Corresponding Roll Width
Glossy Photo Paper, Semi
Glossy Photo Paper,
Heavyweight Glossy Photo
Paper, Heavyweight Semi-
Glos Photo Paper,
Heavyweight Coated
Paper, Premium Matte
Paper, Extra Heavyweight
Coated Paper, Special 1~5,
Flame Resistant-Cloth,
Fabric Banner, Fine Art
Photo, Fine Art
Heavyweight Photo, Fine
Art Textured, Canvas
Matte, Canvas Semi-
Glossy
10-in. Roll (254.0mm)
14-in. Roll (355.6mm)
16-in. Roll (406.4mm)
24-in. Roll (609.6mm)
36-in. Roll (914.4mm)
42-in. Roll (1066.8mm)
JIS B2 / B3 Roll (515.0mm)
JIS B0 / B1 Roll (1030.0mm)
ISO A1 / A2 Roll (594.0mm)
ISO A0 / A1 Roll (841.0mm)
ARCH E Roll (914.4mm)
When Cut Sheet is selected under Media Source on
the Finishing panel
If Roll Paper (Banner) (Roll Media (Banner Printing) for OS 8/9)
has been selected under Media Source in the Finishing panel
When Scaling is selected for Enlarged/Reduced
Printing
When Rotate Page 90 degrees is selected on the
Finishing panel
When several pages are selected for Pages per
Sheet (Page Layout for OS 8/9) on the Layout
panel (Page Setup for OS 8/9)
When Print Centered is selected on the Finishing panel
When the setting selected for Roll Paper Width does
not support borderless printing