Canon W8400 - Manual (Page 114)

2- 53
‹ Using the Media Take-up Unit
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
18
Set the spool mode switch on the media
take-up unit to Auto.
This completes the media take-up unit preparations.
Perform printing from the computer.
Removing Media that Has Finished
Printing
When printing has finished, use the following procedure to
remove paper from the media take-up unit.
1
Press the Online button to display Offline on
the printer display.
2
Press the [ ] button to feed the roll media
slightly.
To protect the spooled paper, feed out paper longer
than the external circumference of the roll.
Offline
Feed Paper
Data
Information Power
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)