Canon W8400 - Manual (Page 345)

5- 49
‹ List of Network Settings
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
„ AppleTalk Settings
„ NetWare Settings
DNS Host Name
Printer Host Name
(Range: 1 to 63 chars.)
NB-15FB
xxxxxxxxx
xxx
DNS Domain
Name Printer Domain Name
(Range: 0 to 64 chars.)
Blank
Multicast DNS
Service Name
Printer Multicast DNS
Server Name
(Range: 1 to 63 chars.) Canon
W8400P
G(xxxxxx)
Item Content Initial Value
Phase Type
Phase type in use
(determines whether
AppleTalk is used.)
Off
Name
The names of the printers
displayed in the Chooser or
printer utility (Printer Center)
(Name length: 1 to 31 chars.)
Canon
NB-15FB
(xxxxxx)
Zone
The name of the printer
zone (1 to 31 chars.)
＊
Item Content Initial Value
Item Content Initial Value
Frame Type
The frame type used by
NetWare.
Off
NCP Burst Mode
Determines whether NCP
burst mode is used. (Normally,
leave this setting on.)
On
Print Service
The print service to use.
(Only one print service can
be selected and enabled.)
NDS
PServer
Packet
Signature
Determines whether or not
to use packet signatures
(Normally leave set to If
Requested by Server)
If
Requested
by Server
Bindery PServer
File Server
Name
Name of the NetWare file
server of the NetWare print
server. (Range: 0 to 47 chars.)
Blank
Print Server
Name
The name of the NetWare
print server in use.
(Range: 0 to 47 chars.)
Blank
Print Server
Password
The password required by
the print server setting.
(0 to 20 chars.)
Blank
Polling Interval
The time interval between
job confirmations.
(Range: 1 to 15 sec.)
5