Canon W8400 - Manual (Page 117)

2- 56
‹ Using the Media Take-up Unit
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
10
If you are using the output stacker, hold up
the stacker arm keeping the left and right
sides horizontal, and then press the arm
towards the back until the arm locks. Next,
mount the two front stacker rods on the front
of the rod holder and the backmost stacker
arm.
Important
z Make sure to attach the stacker rods to the backmost
rod holder and front of the stacker arm. Attaching the
stacker rods to the second rod holder from the back
may cause the ejected paper to miss the output
stacker, causing the printed surface to become dirty.
Use the second rod holder from the back as a
temporary holder for the front of the stacker rod during
maintenance.
Settings to Not Use the Media Take-up
Unit
1
Press the Online button to display MAIN
MENU on the printer display.
2
Press [ ] or [ ] to select Take-up Reel,
and then press [ ].
3
Press [ ] or [ ] to select Disable, and
then press the OK button.
(=) will be displayed to the left of the set value, and
the seeder will be set to Disable.
MAIN MENU
Take-up Reel
↓
Take-up Reel
Disable
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)