Canon W8400 - Manual (Page 22)

1- 19
‹ Function Menus
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Menu Settings Summary Tables
Each menu has the functions described below. Setting values marked with an asterisk “*” are the default settings for the
corresponding menu items.
„ MAIN MENU
Menu Item Setting Values Function
Head Cleaning Head Cleaning A Cleans the printhead.
Head Cleaning B Performs stronger cleaning than Head Cleaning A.
Force Cutting No, Yes Executes a roll cut at the current position. If there
is 10 cm or less from the edge of the paper,
however, the paper will be fed to the prescribed
length before cutting is performed. If the feed
amount is too small, cutting will not be performed.
This menu item is displayed only while “Roll
Media” is selected for printing. 20cm If the feed
amount is too small, cutting will not be performed.
Chng Head Hght No, Yes Adjusts the height of the Printhead. ( → P.2-43 )
Auto Feed No, Yes Selects whether or not to perform automatic
winding using the Media Take-up Unit. This
menu is displayed only if the Take-up Reel has
been turned Enable.
Take-up Reel Disable*,Enable Selects whether or not to use the Media Take-up Unit.
Media Type Plain Paper*, CAD Plain Paper, Plain
Paper HQ, Recycled Coated, Coated
Paper, HW Coated, Premium Matte, Ex
HW Coated, Glossy Photo, Semi-Gl Photo,
HW Glossy Photo, HW SemiGl Photo, Syn.
Paper, Adh. Syn. Paper, Backlit Film,
Flame-Res.Cloth, Fabric Banner, Proofing
paper, News Proof 1, News Proof 2, News
Proof 3, FineArt Photo, FneArt HW Photo,
FineArt Txtr, Canvas Matte, Canvas Semi-
Gl, JPN Paper Washi, Colored Coated,
CAD Trace Paper, CAD Matte Film, CAD
Clear Film, Special 1-5 Selects the media type. Only the names of the
types of media that can be used with the
currently installed ink tank are displayed.
(
→ P.2-4 )