Canon W8400 - Manual (Page 291)

4- 46
‹ Reducing the Amount of Cutting Dust
TOP
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
Reducing the Amount of Cutting Dust
When you are using a media like backlight film that creates
a large amount of cutting dust, you can activate the cutter
dust reduction function to improve the quality of printing and
reduce damage to the printhead. The cutter dust reduction
function can be configured separately for each type of
media. (
→ P.1-21 )
If you activate the cutter dust reduction function, black lines
are printed at the leading edge and trailing edge of each
printed sheet.
Important
z Do not use this function for plain paper, thin paper, or
any other media that buckles easily. These types of
media may not cut properly and can cause paper jams.
z Borderless printing cannot be performed when the
cutter dust reduction function is active. In order to
perform borderless printing, you must switch the cutter
dust reduction function off.
1
If the printer power is off, press the Power
button to switch the printer on.
Within a short time, Online or Offline is displayed.
2
Press the Online button to display MAIN
MENU.
3
Press [ ] or [ ] to select Med.Detail Set.,
then press [ ].
4
Press [ ] or [ ] to select the name of the
media type then press [ ].
The cutter
dust reduction
lines that will
be printed.
The position
that will be cut.
MAIN MENU
Med. Detail Set.
↓
Med.Detail Set.
Backlit Film
↓
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)