Basic procedure for borderless printing, Index contents – Canon W8400 User Manual
Page 131
3- 14
Printing from Windows
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Basic Procedure for Borderless Printing
This section introduces the basic procedure for
borderless printing by using media of the same size as
the original.
1
Create the original in the software application
so it matches the size of the media used for
printing.
Important
z
The following page sizes can be set for borderless
printing. When creating a document, refer to the
following table and create a document with a size for
which borderless printing can be performed.
z
If the media size was pre-selected in the software
application, the selected size must support Borderless
Printing.
z
The Borderless Printing Method that can be
selected on this printer is limited by document size. If a
document size other than those described above is
selected, Borderless Printing Method will be set
automatically in Scale to fit Roll Paper Width.
z
For more details about Scale to fit Roll Paper Width
and Print Image with Actual Size, refer to
About Borderless Printing Methods”
Note
z
Make sure the image created for borderless printing
covers the entire original page.
z
If using an application for which margins can be set,
such as MSWord, etc., set the margins to 0 mm. For
the settings methods, refer to the software application
user guide.
2
Open the printer driver dialog box from the
Print dialog box of the application.
Note
z
For more details about how to open the printer driver
dialog box, please refer to
. (
Borderless
printing on media
the same size as
the original
document
ISO A0, ISO A1, ISO A2, JIS B0,
JIS B1, JIS B2, JIS B3, ARCH E
(width 36”), ARCH E1, ARCH D
(width 24”), ARCH C, Full Size
(20”x24”), 14”x17”, 10”x12”,
14”x21”, 8”x10”, US Photo
(16”x20”), Poster (42”x60”)
Borderless
printing with
enlargement and
reduction
All page sizes