Index contents, Page setup sheet – Canon W8400 User Manual
Page 39
1- 36
Printer Driver
Chapter 3
Printing by Objective
Chapter 7
Operating the
Function Menu
Page Setup Sheet
The Page Setup sheet provides the following settings.
Page Size
Sets the size of the page for the print data.
Borderless
Printing
Prints the image with no margin at the
four edges of the sheet. There are
limitations on the width and type of
media. (
Enlarged/
Reduced
Printing
Allows you to enlarge or reduce printing.
You can select one of the following
methods to do this.
Fit Media
Size
Automatically sets the enlargement/
reduction ratio to match the Media Size
setting.
Fit Roll
Paper Width
Automatically sets the enlargement/
reduction ratio to between 5% to 600%
to match the Roll Paper Width setting.
Scaling
Allows you to scale the size of the image
manually in the range 5% to 600%.
Media Size
Specifies the actual size of the media
that the print data will print on.
Orientation
Allows you to select either portrait or
landscape printing.
Rotate Page 90
degrees
(Conserve Paper)
Automatically rotates the image 90
degrees when print job would result in a
printout with the length smaller than the
width. This saves paper.
Media Source
Specifies whether to use roll media, roll
media (banner printing), or cut sheets.
Roll Paper
Width
Specifies the width of the roll media to
use.
Auto Cut...
Specifies whether the sheet is cut after
printing.
Size Options...
Allows you specify arbitrary paper sizes
outside of the standard paper sizes for
long printouts, etc.