Keri Systems Doors16 - Manual (Page 150)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 150 Revision 2.1
2. Click on the button.
Select Doors
The doors radio buttons allow an operator to select if event information should be reported for
all doors or for just one selected door.
1. To select all doors, click on the All Doors radio button (the default value, see Figure
132).
2. To select one door, click on the Selected Door radio button. A list of all available doors
appears in the window (see Figure 134).
Figure 134 – Available Door List
3. Scroll through the list and locate the door for which a report is desired. Click on that door
name and it will be entered into the selected door field (see Figure 135).
Figure 135 – Selected Door
4. To select a different door, click on the box and the list of available doors will
reappear.