Keri Systems Doors16 - Manual (Page 202)

Doors™ Users Guide Keri Systems, Inc.
October 1998 01821-001
Page 202 Revision 2.1
Manual Output Control
Manual control for output points allows an operator to manually turn-on/enable or turn-off/
disable an output point. This allows an operator to control an output point and to override a
link event that is driving an output.
Following the window alarm example above, an operator can use the manual output control
feature to manually test the window alarm periodically.
1. To manually control output points, click on the Operate
⇒
Output Control pull-down
menu. A window similar to Figure 194 appears.
Figure 194 – Output Control Window
2. Under the Output Point Name list, locate the output point to manually control. For this
example, locate output point 3 – the Window Alarm.
3. Under the Output Control Off/On buttons, click on the On button to turn-on/enable an
output point.
4. Under the Output Control Off/On buttons, click on the Off button to turn-off/disable an
output point.
5. The status field at the bottom of the window displays the results of the operations
performed (see Figure 195).
Figure 195 – Toggled Output Points