Keri Systems Doors16 - Manual (Page 195)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 195
Figure 185 – Link Configuration Window
Link Parameters
The following list is the parameters that need to be configured when defining an I/O link.
Refer to Figure 185 to locate the parameter fields. Following this list is an example of an I/O
Link.
Controller
The Controller field allows the operator to select the controller with I/O links to be
configured.
1. Click on the arrow in the "Controller" field and a list of the controllers with available
I/O points appears.
2. Scroll through this list and click on the controller which has the I/O points to be
configured.
Link Name
To assign a descriptive name to a link:
1. Click in the "Link Name" field.
2. Type the name to be assigned to the point. For example, for the window alarm, type
Window Alarms.
Option Board
The "Option Board" field displays the model number of the option board providing the input
and output points. This is an information field and is not editable.
Inputs
The "Inputs" check boxes allow an operator to select the inputs that should be assigned to the
I/O link. Inputs with grayed-out check boxes and without input point names are unavailable
for assignment.
1. Click on the check box beside the input point name. A check mark appears indicating the
input is selected. Every click in the check box toggles between selecting and deselecting.