Keri Systems Doors16 - Manual (Page 55)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 55
Figure 25 – Cleared Time Zone Window
4. Following the day-shift parameters given above, no access is allowed on Sunday.
Double-click in the Sunday Start1 cell and type N. The "Never" key appears in the cell
setting this time segment to never allow access on Sunday.
5. Double-click in the Monday Start1 cell and type 06:00.
NOTE: When you double-click in a cell, a spinner icon appears. If you click on the hour side
of the time (00:00), you can use the spinner to advance the hours forward or backward to
select the desired hour. If you click on the minute side of the time (00:00), you can use the
spinner to advance the minutes forward or backward to select the desired minute. You may
find this method easier to set the time instead of directly typing the information into the cell.
6. Double-click in the Monday Stop1 cell and type 20:00.
7. Repeat steps 5 and 6 for the Tuesday through Friday Start 1 cells and Stop1 cells.
8. Double-click in the Saturday Start1 cell and type 08:00.
9. Double-click in the Saturday Stop1 cell and type 18:00.
10. Double-click in the Hol1 Start1 cell and type 08:00.
11. Double-click in the Hol1 Stop1 cell and type 12:00.
12. Click in the "Timezone Names" field and type Day Shift.
13. For this example, the time zone window should appear identical to Figure 26. Any
discrepancies can be corrected by clicking on the cell or field and making the correction.
Figure 26 – Day Shift Time Zone