Keri Systems Doors16 - Manual (Page 99)

Keri Systems, Inc. Doors™ Users Guide
01821-001 October 1998
Revision 2.1 Page 99
3. Click on the Preferences tab. The resulting window should look similar to Figure 77.
Figure 77 – Selecting Card Database Preferences
NOTE: The keypad number function seen in Figure 77 is not functional. It is for a feature in
development.
4. If the box beside the preference options has a check mark, the option is enabled; if there
is not a check mark, the option is disabled.
5. To change a preference option, click on the box beside the option. Every time the box is
clicked, it changes state between on and off.
6. Click on the button. If the configuration option changes are not saved before
clicking any other button or exiting the preferences window, the preference options are
lost and must be re-entered.
7. Now update the access control network with the new information. Click on the
button on the tool bar (for details on the update process refer to the Update the Network
section found later in this users guide).
Personal Setup
The personal setup tab allows for the creation of up to six separate personal data categories to
be designated for cardholder data entry. Examples of fields that may be created are
automobile license plate number, home telephone number, spouse’s name, demographic
information.
When a personal data category is created, a sixth tab, the Personal tab, will be added to the
Setup/Cards window. The actual personal data for each cardholder is entered in the personal
tab. In this example, a personal data category will be created for entering cardholder home
telephone numbers.