Maxim Integrated 6613_OMU_2+2S_URT_V100 - Manual (Page 32)

6613_OMU_2+2S_URT_V1_00 Firmware Description Document UG_6613_060
32 Rev. 1.1
Max Iteration
for Voltage
C8 1 +10
Number of attempts to reach the
target value (Calibration Voltage
entry) within the programmed
tolerance.
If maximum number of
iterations to be tried for
obtaining the target value of
voltage within the set
tolerance (at C4) is to be
reduced to 5, then enter:
>)C8=+5<CR>
Max Iteration
for Current
C9 1 +10
Number of attempts to reach the
target value (Calibration Voltage
entry) within the programmed
tolerance.
If maximum number of
iterations to be tried for
obtaining the target value of
power within the set
tolerance (at C5) is to be
reduced to 5, then enter:
>)C9=+5<CR>